Cold weather can represent a serious danger for your home if you don't prepare ahead of time. One of the most important things you need to do to get your home ready for the winter is to carry out a bit of basic HVAC maintenance. Most people will check their insulation, seal any duct leaks and make sure they have a clean filter installed in their heating and cooling system. One thing they often forget is their plumbing. Carefully inspecting your plumbing and addressing any issues you find can save you a lot of trouble when freezing temperatures arrive. The last thing you want is a burst pipe, resulting in massive damage throughout your home. The following tips will help you get your home ready.
Look for Leaky Pipes
Check all of your faucets and pipe connections for any indications of leaks. Immediately repair any leaks that you come across.
Check for Corrosion
If you have rust or corrosion on your pipes, connections or fittings, you may be at risk for leaks at a later time. Make sure you deal with this before it becomes a problem.
Check the Water Pressure
Turn on the faucets and check their pressure. If the pressure seems low, this could point to a problem with your pipes. On the other hand, it might be something as simple as a clogged aerator on the faucet.
Look at the Drains
Ensure that the drains in your home are moving water out efficiently. If you have a slow drain or one that is entirely backed up, the blockage will need to be removed.
Inspect Your Toilet
Remove the top of the tank from your toilet and then test the toilet by flushing it. Look down into the tank for any loose or damaged parts. Also check for any cracks that might be causing leaks.
Check Your Water Heater
One of the most important plumbing features in your home that you should check is your water heater. Inspect your water heater's burner to confirm that it's burning cleanly. If you see yellow in the flame, clean the burner. It's also a good idea to turn off your water heater and thoroughly drain it to remove any debris.
Look for Exposed Pipes
Look inside and outside your home for any exposed pipes that might tend to freeze and burst. You might have pipes running through your basement, attic or to outside faucets that could easily freeze this winter. Pipes like these should be covered with a thick layer of pipe insulation. You might also want to consider putting this insulation on the pipes running underneath your kitchen and bathroom counters, since these spaces tend to get less heat from your heating and cooling system.
If you have questions, or if you need professional help, speak with professionals like A Absolute Plumbing & Heating.