With all of the amenities in homes today, it makes sense that you expect things to work accordingly to plan at all times. When you turn the hot water valve on in your home, you expect the water to be there. Unfortunately, there are things that can go wrong that cause your water heater to break down and not be able to produce hot water on demand. If you are struggling to figure out what might be causing you not to have any hot water, you might want to look into one of these three things below.
Bad gas control valve.
In the event that your gas valve was to malfunction, it will end up cutting off the supply to your burners. When that happens, your system won't be able to create heat. The way to overcome the problem is to have your valve replaced.
Pilot or burner failure.
If your water heater is powered by gas, it depends on a burner to ignite the system and transfer the heat to the tank. Your burner has to stay clean and free from corrosion. A dirty burner will end up causing your system to suffer to try and draw enough oxygen just to be able to ignite. The dirtier the burner gets, the worse the problem is going to become. Eventually, your jets aren't going to end up coming on whatsoever and your tank won't be able to produce hot water. When the pilot light stops lighting, your burners are going to struggle to light as well.
Bad heating elements.
Those with an electric water heater have to worry about the heating elements in the tank. If those heating elements start going out, you aren't going to have any hot water left. The minute you start noticing a loss in hot water, you need to have a licensed professional come out and take a look at it. This means one of your elements has already failed. In the event the other element was to go out, you will be left with nothing more than cold water. If your circuit breaker got tripped or a fuse blew out, that could also cause your system to end up suffering.
Anytime you notice that your hot water isn't like it used to be, you need to turn to a water heater repair specialist who can come out and inspect your system and get to the bottom of the problem for you.